Mincon Support Station and RDO

The Mincon Support Station is designed to deliver a mixture of compressed air,  rock drill oil and water/polymer mix to your HDD Pilot Hammer or HDD Pull Reamer.  It connects the compressor to the drill through a robust 2" air manifold.  The Oiler has a non presurrized 5 US gallon (18.9 Liters) tank and is adjustable between 2 - 16 US Pints (1 - 7.6 Litres) per hour.

The Oilers pump can develop a maximum output pressure of 600 PSI (41.4 Bar) and the unit itself has a maximum operating pressure of 500 PSI (34.5 Bar).  The Mincon Support Station can shut off air to the drill using a 12V wireless remote control.  A hard wired 12/24 V controller is also available as an option.

The Mincon Support Station is equipped with a diaphragm water pump that is driven by an air motor.  The water pump can deliver up to 9 US gallons (34.1 Liters) per minute depending on the air pressure being supplied to the air hammer. Higher pressures will limit the water from being injected into the air manifold. The maximum pressure the diaphragm water pump will build is 580 psi in most conditions.